Silhouette CAMEO5

01
About Silhouette CAMEO
5
/CAMEO
5
PLUS
11
1
-
2
Removing packaging materials from the machine
There are strips of tape and cushions to hold the moving parts of Silhouette CAMEO
5
/CAMEO
5
PLUS in place
during shipment and prevent any damage to the machine.
Remove all of the packaging materials (strips of tape and cushions).
1
Remove the machine from the box.
Note
Silhouette CAMEO
5
alone weighs approximately
5
kg, and Silhouette CAMEO
5
PLUS alone weighs
approximately
5
.
5
kg.
Open the package on a sturdy surface.
Attempting to work on unstable ground can cause the machine to fall and cause serious injury to
personnel.
2
Remove the strips of (blue) tape and cushions (
2
pieces) that hold the parts for the machine in place.
Cushion
Pull out to the top
3
Open the cover and remove the strips of (blue) tape, protective sheets (
2
pieces), and cushions (
5
pieces) that hold the parts in place.
Protective
sheet
Cushion
Cushion
Pull out to the front
Protective sheet
Cushion
Cushion
Pull out from the back