04
Troubleshooting
65
The media slip out of the Pinch Roller
Is the leading end of the media butted against the Pinch Rollers on both sides and loaded
straight?
• Check the following points to ensure that the media are loaded straight correctly.
• Butt the leading end of the media against the Pinch Rollers on both sides.
• Hold the media so they do not move until the machine starts feeding.
Pinch Roller:
Hold the paper here and
feed it into the machine.
Pinch Roller:
Hold the paper here and
feed it into the machine.
Pinch Roller Unit
Pinch Roller Unit
To Next Page
Loading...
