23
GB
1. Overview
1 Mini food pusher
2 Maxi food pusher
3 Lid
4 Coarse grater and cutting disc
(usable from both sides)
5 Fine grater and cutting disc
(usable from both sides)
6 French fries disc
7 Whisking disc
8 Blade assembly
9 Working container
10 Power cable with mains plug
11 Suction feet
12 Dial (P / 0 / 1 / 2)
13 Base unit
14 Sealing ring (for mini crusher)
15 Blade unit (for mini crusher)
16 Mini container (for mini crusher)
17 Axle
18 Screen (for pulp and pips)
19 Mixer assembly
20 Small juicer cone
21 Large juicer cone
Rear fold-out page, Figure A:
22 Cable spool
Rear fold-out page: Figures A - M
Not shown:
Blade guard (for the blade assembly)
Thank you for your trust in our
products!
Congratulations on your new multifunction food processor.
For safe handling of the product and in order to get to
know the entire range of features:
• Read these user instructions through thor-
oughly prior to initial use.
• Above all, observe the safety instructions!
• The device should only be used as described
in these user instructions.
• Keep this copy of the user instructions for
reference.
• If you pass the device on to someone else,
please include this copy of the user instruc-
tions. The user instructions are a part of the
product.
We hope you enjoy your new multifunction food proces-
sor!
Symbols on your device
2. Intended use
This food processor is used to blend, mix, stir, chop, whisk, cut
and grate food, cut French fries and squeeze citrus fruits.
The device is designed for private, domestic use. The de-
vice must only be used indoors.
This device must not be used for commercial purposes.
Foreseeable misuse
WARNING! Risk of material damage!
~ Do not use the device to chop particularly hard food
such as bones or nutmegs.
~ The blade assembly is not suitable for grain, ice, nuts
or similar types of hard food.
~ The mini crusher must not be operated with liquids.
The symbol indicates that materials labelled in this
way do not change either the taste or the smell of
food.
__326488_Kuechenmaschine Multi_B8.book Seite 23 Dienstag, 6. August 2019 10:40 10
To Next Page
Loading...
