Sim2 D10 - Page 26

D10
26
iteM deScriptiOn default
Brilliant color
Press the cursor ◄ ► button to set brilliant color On or Off.
(Range: ON – OFF)
Brilliant Color Technology allows for more vivid, rich color while in-
creasing mid-tones and superior black levels.
ON
Logo
display
Press ◄ ► to enable or disable if the logo displays when the pro-
jector starts, and when no source is detected.
(Options: ON – OFF)
ON
Video
overscan
Press the cursor ◄ ► button to set video overscan.
(Options: 0 %, 2.5%, 5%)
0%
Video Sync
Level
Press the cursor ◄ ► button to set video sync level when video
signal is not detected (component input use only).
(Range:160 – 300 mv).
280mV