Simex MultiCon CMC-99/141 User Manual

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Fig. 7.49. Change source configuration for different types of modules
b) built-in digital input is always designated as
Inp.X2: Digital 24V
The device has a built-in digital input which can be used for example as a switch for a
process. The descriptions of the parameters is shown in
Chapter 7.9.3. Built-in inputs -
Binary input Inp.X2 : Digital 24V
.
c) built-in
Demo
input numbered
Inp.X3:Demo, Inp.X4: Demo, Inp.X5: Demo
The device has 3 built-in simulation
Demo
inputs which can be defined by the user.
The descriptions of the parameters is presented in
Chapter 7.9.4. Built-in inputs - Demo
input numbered X3, X4, X5
.
The user should remember that if the
Hardware input
is displayed in more than one
logical channel and if the user changes the parameters in one of these channels,
that will result in the same changes in all the others.
96
1
2
3
3
2
3
2
i

Simex MultiCon CMC-99/141 Specifications

General

Brand	Simex
Model	MultiCon CMC-99/141
Category	Controller
Language	English