5. Specify the time delay between RingCast start and LSM backup start.
NOTE
RingCast malfunction due to parallel transmission
If LSM executes the reaction immediately, then the affected router nodes
are already sending while the RingCast is not yet complete. This can inter-
rupt the RingCast.
Set a delay that is one minute longer than the maximum transmission
time of the RingCast (see
Maximum transmission time in RingCast
[}128]
).
6. Click on the OK button.
9 The window "Time interval event" closes.
7. Click on the button Add .
9 The window "Administration" opens.
WaveNet (Manual)
5. WaveNet Manager
121 / 210
To Next Page
Loading...