This illustration shows the wiring when the input acknowledgement is
output on O1. Connect O1 to a free digital input as shown and forward this
to the LSM.
5.4.5.8 RingCast function test
The RingCast has no self-test function.
WARNING
Impairment or failure of protective functions due to changed conditions
The activation of the protection functions in RingCast is based on wireless
connections and Ethernet connections. Wireless connections in particular
can be affected by changing environmental conditions (see
Radio network
[}21]
und
Challenges in wireless networks [}24]
). This also influences the
activation of the protective functions in the RingCast and can jeopardise
the safety of persons and property that are additionally protected by the
protective functions in the RingCast, for example.
1. Test the protective functions at least once a month (see
RingCast
function test [}136]
).
2. If necessary, also observe other guidelines or regulations that are
relevant for your locking system (especially for escape and rescue
routes and fire protection. You are solely responsible for ensuring
compliance with these guidelines and regulations).
WaveNet (Manual)
5. WaveNet Manager
136 / 210
To Next Page
Loading...