SimonsVoss WaveNet - Page 193

LockNodes
Device Signalling Meaning reaction
WNM.LN.I
WNM.LN.I.MP
4x beeping (after con-
tacting)
LockNode and locking
device connected.
No signal (after con-
tacting)
LockNode and locking
device not connected.
1. Check the batteries
(see leaflet on
locking cylinders).
2. Reset the LockNo-
de (see
LockNodes
[}159] ).
WNM.LN.I.S2
4x beeping (after con-
tacting)
LockNode and locking
device connected.
No signal (after con-
tacting)
LockNode and locking
device not connected.
1. Check the batteries
(see SmartHandle
AX manual).
2. Reset the LockNo-
de (see
LockNodes
[}159] ).
WNM.LN.I.SH
4x beeping (after con-
tacting)
LockNode and locking
device connected.
No signal (after con-
tacting)
LockNode and locking
device not connected.
1. Check the batteries
(see SmartHandle
manual).
2. Reset the LockNo-
de (see
LockNodes
[}159] ).
WNM.LN.I.SREL2.G2
WNM.LN.I.SREL.G2
4x flashing (after con-
tacting)
LockNode and
SmartRelay connec-
ted.
No signal (after con-
tacting)
LockNode and
SmartRelay not con-
nected.
1. Check the power
supply of the
SmartRelay.
WaveNet (Manual)
7. Signalling the operating status
193 / 210