SimonsVoss WaveNet - Page 194

Device Signalling Meaning reaction
CompactReader Lock-
Node (not retrofit-
table)
3x flashing, followed
by 4x flashing (after
battery change)
Power-On-Reset
CompactReader,
LockNode and Com-
pactReader connec-
ted.
3x flashing (after bat-
tery change)
Power-On-Reset
CompactReader,
LockNode and Com-
pactReader not con-
nected.
LockNode and Com-
pactReader are per-
manently connected.
1. Reset the Com-
pactReader.
2. Replace the device
(see
Reprogram or
replace the device
[}154] ).
4x flashing (after con-
figuration)
LockNode configured
in the Compact-
Reader.
No signal (after con-
figuration)
LockNode not con-
figured in the Com-
pactReader.
1. Check the batteries
(see
CompactReader
Quick Reference
Guide).
2. Reset the Com-
pactReader.
3. Replace the device
(see
Reprogram or
replace the device
[}154] ).
WaveNet (Manual)
7. Signalling the operating status
194 / 210