SimonsVoss WaveNet - Page 195

Device Signalling Meaning reaction
WNM.LN.R
Flickering (signal LED)
no WaveNet configur-
ation present.
1. Add the
RouterNode to your
WaveNet (see
Add
RouterNode to
WaveNet [}53] ).
1x (signal LED)
Transmission/recep-
tion power between
LockNode and
WN.XN.XR poor
(check by pressing the
button marked
Init )
Improve the signal
quality (see
Improving
signal quality [}143] ).
2x (signal LED)
Transmission/recep-
tion power between
LockNode and
WN.XN.XR sufficient
(check by pressing the
button marked
Init )
3x (signal LED)
Transmission/recep-
tion power between
LockNode and
WN.XN.XR optimum
(check by pressing the
button marked
Init )
WNM.LN.C
2X short (red LED) Power-on reset.
Flickering (alternating
red and green)
Data transfer from/to
LockNode.
WaveNet (Manual)
7. Signalling the operating status
195 / 210