EasyManua.ls Logo

Simrad ES60 - INSTALLATION REV A - General Installation Requirements

Simrad ES60 - INSTALLATION REV A
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
General safety rules
TheSimradES60Fishnding echo sounder system operates on
230 Vac 50/60 Hz.
WARNING
This voltage may be lethal!
The following safety precautions must be followed at all times
during installation and maintenance work:
Always switch off all power before installation or
maintenance. Use the main circuit breaker, and label
the breaker with a warning sign that informs others t hat
maintenance or installation work is being carried out on the
system.
Do not open the rack or cabinet doors while in rough seas. I t
may swing open suddenly and cause damage or injury.
For safety reasons during troubleshooting on the equipment
with power ON, two persons must always be present.
Read and understand the rst aid instructions for electric
shock.
Whenever maintenance is carried out, it is essential that a
rst
aid kit is available, and that the maintenance personnel ar
e
familiar with the rst aid instructions for electrical s
hock.
The various parts of the system are heavy. Make sure
that
the appropriate tools and certied lifting equi
pment are
available, and that the personnel are trained i
n installation
and maintenance work.
304699/A
11

Table of Contents

Related product manuals