Simrad ES60 - INSTALLATION REV A - GPT External Sensors

Simrad ES60
GPT external sensors
This cable is used t o connect the General Purpose Transceiver
(GPT) to external motion and temperature sensors. It c onnects to
the 25–pin D-sub connector on the front side of the GPT.
17
4
2
1
Pitch(+)
Temp(+)
Roll(+)
Temp(AGND)
Heave(+)
Pitch(-)
Roll(-)
Heave(-)
3
14
15
16
W620C
Rev.D
External sensors
The cable screen is connected to the plug house.
GPT
25-pin D-sub connector
25
14
1
13
Auxiliary
connector
(female)
SIMRAD
GPT
• Conductors: 2 x 0.22 mm2
• Screen: Overall braided
• Voltage: 60 V
• Maximum diameter: Defined by the plugs
60
304699/A