8.3 SimNet groups
The SimNet group function is used to globally control
parameter settings in groups of units. The function is
used on larger vessels where several units are connected
via the SimNet network.
By assigning several units to the same group, a
parameter update on one unit will have the same effect
on the rest of the group members.
For additional information about SimNet groups, refer to
SimNet group function, page 23 onwards.
Setting the unit’s instance number
The instance number is used to identify multiple units of
the same model when connected to a SimNet or
NMEA2000 network. The instance number is added to the
product name e.g. IS20-3 for easy identification of the
unit.
Range Change per step Default value
0 – 63 1 0
Configuration | 67
To Next Page
Loading...
Need help?
General
