9 Maintenance
9.1 General maintenance
The IS20 instruments are “repair by replacement” units,
and the operator is therefore required to perform only a
very limited amount of preventive maintenance.
If the unit requires any form of cleaning, use fresh water
and a mild soap solution (not a detergent). It is
important to avoid using chemical cleaners and
hydrocarbons such as diesel, petrol etc.
Make sure that all open SimNet connectors are fitted with
a blocking plug (part no 24006355).
Always put on the weather cover when the unit is not in
use.
9.2 Service information
The main menu includes a
Service item giving access to
several options for displaying
data used when testing or
trouble shooting the system.
SimNet status
The SimNet status screen
provides status information
about the different SimNet
messages used by the system.
Maintenance | 69