14 |
Getting started | RS90S User Manual
Charging a wireless handset
When a wireless handset is not in use, it should be placed on its
cradle for charging.
Locate the bottom of the handset onto the cradle first, and then
press the top of the handset inwards until it clicks into the top lugs.
Handset operation priority
If you want to use HS1, but it displays “HS# IN USE,” it means that
another handset is operating.
To shift control to HS1:
1. Press [X].
2. The display shows “Take Control?”
• Press [OK] to take over control.
• Or, [X] to leave the other handset in control.
To Next Page
Loading...
Need help?
General
