| 67
Installation | RS90S User Manual
Installation
Checklist
The following items are included in the RS90S radio package:
RS90S VHF radio transceiver
• RS90S transceiver unit
• 2 m power supply cable
• 8-pin terminal connector x4
• 2-pin terminal connector x2
• Spare 10 A fuse
• Cable retaining bracket with cable ties and mounting screws
• Transceiver fasteners:
• M3.5 x 28 mm machine screw x4
• M3.5 hex nut x4
• Flat washer x4
Wired handset
• HS90 wired handset with cradle
• 5 m handset connector cable, including mid-cable connector.
• Flush mounting plate for handset connector cable socket
• Silicon cover for cable connector
• Handset fasteners:
• M3.5 x 15 mm self-tapping screw x2 (cable mounting plate)
• M3.5 x 10 mm self-tapping screw x2 (top holes)
• M3.0 x 40 mm self-tapping screw x1 (bottom hole)
• M3.0 x 40 mm machine screw x1 (bottom hole)
• M3.5 x 28 mm machine screw x2 (top holes)
• M3.5 nut x2
• M3.0 nut x1
• Assorted spring washers and flat washers
7
To Next Page
