68 |
Installation | RS90S User Manual
External speaker unit
• External speaker (with 5 m cable)
• Foam gasket (for flush mounting)
• Plastic speaker surface mount box
• Speaker fasteners:
• M3 x 10 mm self-tapping screw x4 (speaker only)
• M3 x 10 mm machine screw x4 (speaker only)
• M3 x 40 mm self-tapping screw x4 (speaker and surface mount
box)
• M3 x 40 mm machine screw x4 (speaker and surface mount box)
• M3 nut x8
• Spring washer x8
• Flat washer x8
Documentation
• User Manual
• Warranty Card
¼ Note: A VHF antenna is not provided by Simrad. An antenna with
a PL259 plug is required. Consult your Simrad dealer for advice if
required.
System diagram legend
1 RS90S VHF radio transceiver
2 12 VDC fused power supply
3 HS35 wireless handset (optional - maximum 2 handsets)
4 HS90 wired handset (maximum 4 handsets)
5 External loudspeaker (maximum 4 speakers)
6 NMEA 0183 GPS network connection
7 AIS Data output
8 Loud hailer speaker (optional)
9 VHF antenna with PL259 connector
10 NMEA 2000 network connection
11 External GPS Antenna (optional)
To Next Page
Loading...
Need help?
General
