Simrad RS90S User Manual

88 |
Setup | RS90S User Manual
Radio setup
UIC
US and AUS models only.
This option allows you to switch between USA, International, or
Canadian channel banks. The selected channel bank is displayed
on the LCD along with the last used channel. For details of channel
banks, see “Appendix 7 - Channel charts” on page 119.
1. Select MENU → RADIO SETUP → UIC.
2. Select the desired channel bank then press [OK].
Editing channel names
If a channel has been assigned a name, the name appears next to
the channel number on the standby screen. You can edit or delete
the channel names.
A list of default channel names is given in “Appendix 7 - Channel
charts” on page 119.
1. Select MENU → RADIO SETUP → CH NAME.
2. Use ▲ and ▼ to scroll to the one you want to change then press
[OK].
3. Select EDIT.
4. Enter the new name over the existing one.
5. Press [OK] repeatedly if necessary to display the YES/NO
confirmation.
6. Scroll to YES or NO as required and press [OK].
To delete a channel name:
Use a similar procedure to the above, but select DELETE at step 3.
MENU SELECT
LOCAL/DIST
CONTRAST
GPS/DATA
RADIO SETU
USA
16
Hi
DSC
PRI
RADIO SETUP
UIC
CH NAME
RING VOLUME
KEY BEEP
USA
16
Hi
DSC
PRI
UIC
USA
INT L
CANADA
USA
‘
16
Hi
DSC
PRI
MENU SELECT
LOCAL/DIST
CONTRAST
GPS/DATA
RADIO SETU
USA
16
Hi
DSC
PRI
RADIO SETUP
UIC
CH NAME
RING VOLUME
KEY BEEP
USA
A
16
Hi
DSC
PRI
CH NAME
PORT OPS
Lo
USA
16
Hi
DSC
PRI
PORT OPS
EDIT
DELETE
USA
16
Hi
DSC
PRI

Simrad RS90S Specifications

General

Brand	Simrad
Model	RS90S
Category	Radio
Language	English