74 |
Installation | RS90S User Manual
Installing a wireless handset cradle
The wireless handset has a cradle that incorporates inductive
charging for the rechargeable battery.
1. Choose a suitable location that provides sufficient room for the
handset to fit securely in the charging cradle.
2. Hold the cradle at the chosen location and mark the positions of the
fastening holes and the wire hole onto the mounting surface.
3. Drill the holes where marked with a drill bit suited to the selected
mounting fasteners.
4. Feed the wire through the wire hole. If mounting outside, apply a
suitable sealant or fit a cable gland.
5. Attach the handset cradle using the supplied self-tapping screws or
pan head machine screws.
6. Connect the wire to a 12 VDC source via a 1 A fuse:
• Red wire to 12 VDC positive
• Black wire to negative.
To Next Page
Loading...
Need help?
General
