Simrad RS90S User Manual

50 |
DSC procedures | RS90S User Manual
Calling using the call log
The call log contains the contact details for the 20 most recent
incoming calls, so that you can call one of them back quickly.
1. Select DSC MENU → CALL LOG.
The display shows the details of the most recent call.
2. Use ▲ and ▼ to find the caller you want to call back and press [OK].
3. Choose the option:
• CAll BACK — to send a DSC call request, or
• DELETE — to delete the call from the call log.
4. On the “CHOOSE CH” screen, select INTER-SHIP. (Or, select MANUAL
to use a duplex channel—see point 2 of “General usage” on page
46.)
The display shows “SET INTER”.
5. Use ▲ or ▼ to reach the working channel you want to specify and
press [OK].
6. When the SEND prompt appears:
• Press [OK] to send the call request on CH70, or
• Press [X] to exit without sending.
7. When you hear the acknowledgement alert tone:
• Press the [SILENC] softkey to silence the alert.
• Press [PTT] to commence voice communication.
8. If there is no reply within 30 seconds, the display shows: “SEND
AGAIN?”
You can then select:
• [YES] to send again, or
• [NO] to quit and return to standby mode.
02 SUNBIRD
INDIVIDUAL
ROUTINE
05:00
USA
C
16
Hi
DSC
02 SUNBIRD
INDIVIDUAL
ROUTINE
05:00
USA
C
16
Hi
DSC
02 SUNBIRD
CALL BACK
DELETE
USA
C
16
Hi
DSC
CHOOSE CH:
INTER-SHIP
MANUAL
USA
C
08
Lo
DSC
SUNBIRD
INDIVIDUAL
ROUTINE
SET INTER
Lo
USA
C
08
DSC
SUNBIRD
INDIVIDUAL
ROUTINE
SEND?
Lo
USA
C
08
DSC

Simrad RS90S Specifications

General

Brand	Simrad
Model	RS90S
Category	Radio
Language	English