Singer S18 - Drawing Up the Bobbin Thread

20
Drawing Up the Bobbin Thread
Step 1
Raise the presser foot lifter.
Hold the needle thread with your finger and press
the needle up/down button twice to bring up the
bobbin thread.
1 Needle thread
2 Needle up/down button
Step 2
Lift up the needle thread to bring up a loop of
bobbin thread.
3 Bobbin thread
Step 3
Slide 4” (10 cm) of both threads to the back under
the presser foot. You can also pull the threads up to
the thread cutter on the machines cover plate.
See page 5 of manual for machine identification.
1
2
1
3
3
1
1
3
2