Singer S18 - Advanced Stitches and Customization; Eyelet Creation

55
Eyelet
Machine Setting
Stitch pattern: 20 (Mode 3)
Thread tension: 1-4
Presser foot: Satin stitch foot F
Foot pressure: 3
The eyelet is used for making holes for belts, crafts and
cording.
To sew
Depress the foot control to sew.
The machine will sew an eyelet and stop automatically
when completed.
Open the eyelet with an awl, hole punch or pointed
scissors.
Adjusting the shape of an eyelet
Correct the shape of the eyelet as follows:
If the eyelet gap opens, press “–” on the stitch length
adjusting button.
If the eyelet overlaps, press “+” on the stitch length
adjusting button.
The shape can be adjusted within L1 to L3.