SinoGNSS M300 Plus GNSS - Satellite Tracking; Receiver Utility

M300 Plus GNSS Receiver User Guide
15
4.3.4 Satellite Tracking
Select SBAS and smooth pseudorange, setup the mask angle and select the types of
the tracking signal based on surveying requirements.
4.3.5 Receiver Utility
In this section, you can control M300Plus remotely, including:

Clean EPH: delete ephemeris information saved in the receiver
 Reboot: Restart the receiver
 Power Off: Turn off the receiver

Factory Default: recover the receiver to factory default setting