SinoGNSS M300 Plus GNSS - TCP;IP Config

M300 Plus GNSS Receiver User Guide
22
 Raw observation data: ComNav binary format raw data
 Correction data: format from RTCM
 Navigation data: GPGGA and GPZDA message
COM--- COM1, RS232 (DB9 port), Lemo—COM2, RS485 (Lemo port)
4.6.2 TCP/IP Config
Dataflow can be transferred via the internet by using TCP Server or TCP Clients.
TCP Server: Any user can receive the data through TCP Clients protocol
TCP Clients: Send data to the specified IP address and port
For data flow:

Correction data: Choose the format and the corresponding message

Navigation data: GPGGA message
 Raw observation data: ComNav binary format raw data
 Direct connection: Please refer to 4.6.2.1 Direct connection model