Sita ConSpector - Page 23

SITA Messtechnik GmbH – Operating Instructions SITA ConSpector
21
Settings
FluoLevel pro-
file
Description
Target temper-
ature
If you have activated target temperature monitoring, a warning is issued if the
sample temperature is outside the specified tolerance range of the selected set-
point temperature. No current measured value is displayed. Saving is not pos-
sible
Alarmbar Min
Defines the alarm limits (Alambar Min). If the measuring value falls below the
alarm limit, the bar and the measuring value blink as visual confirmation.
Alarmbar Max
Defines the alarm limits (Alambar Max). If the measuring value exceeds the
alarm limit, the bar and the measuring value blink as visual confirmation.
Min warning
Defines the warning limits (Minimum). If the measuring value falls below the
warning limit, it blinks as visual confirmation.
Max warning
Defines the warning limits (Maximum). If the measuring value exceeds the warn-
ing limit, it blinks as visual confirmation.
Other
parameters
Averaging Internal device averaging. We recommend staying with Standard 3. The meas-
urement takes unnecessarily long, if the value is higher than 3. If the value
equals 1, fluctuations of the ambient light are not detected.
Target pointer Adjusting the brightness of the target pointer.
Save
Save automatically (Auto), ask for saving (Ask) or save Off (Off).