Sita ConSpector - Technical Data

SITA Messtechnik GmbH - Operating Instructions SITA ConSpector
34
9 Technical data
Device: .................................................... SITA ConSpector
Sensor
Fluorescence intensity
Measuring range .................................................... (0…40.000) RFU* [relative Fluorescence Unit]
Variation ................................................................ max. 0.5 % of measuring range
Exitation ................................................................. 365 nm*, max. 150mW
Detection ............................................................... 460 nm*
Resolution .............................................................. 0.1 RFU
ContLevel
Measuring range .................................................... 0…40.000
Resolution .............................................................. 1 digit
Temperatur
Measuring range .................................................... (0…80) °C
Variation ................................................................ max. 0.5 % of measuring range
Power supply
Lithium ion battery .................................................. 3,6 V/1950 mAh;
5 V/500 mA (USB)
Power supply unit/USB ............................................ (100…240) V / 5 V
Max. power consumption: ....................................... ca. 2,5 W
Interfaces, memory, dimensions and weight
Housing: ................................................................ Aluminium, IP 51
Display: ................................................................. LCD, illuminated
Number of measurement profiles ............................. 254
Memory: ................................................................ permanent: Measurement parameters/data
8,192 measured values per profile
Sizes handheld (LxWxH): .......................................... 129 x 82 x 48 mm³
Sizes sensor head (LxWxH):):.................................... 142 x 50 x 30 mm³
Weight (without accessories): ................................... 530 g
Allowable ambient temp. (storage/operation): .......... (-20...60) °C/(10...50) °C
Allowable ambient conditions: ................................. rel. humidity < 70 %
Immersion probe: ................................................... Stainless steel (1.4301), quartz glass, Viton
*with default optics