SITA Messtechnik GmbH - Operating Instructions SITA ConSpector
What has to be taken into account in a measuring system analysis?
When performing a measurement system analysis, the photobleaching effect and the uneven dis-
tribution of impurities or sample separation must be taken into account. It is therefore recom-
mended to carry out the measurement system analysis in the first step on the optional SITA fluores-
cence standards, as these effects do not occur there. For further measurement system analyses, in
which the influences of the tester and test specimen are also examined, both the influence of the
uneven distribution of the impurity and the photobleaching effect must be taken into account.
To Next Page
Loading...
