Precautions for Safe Use
2-5
Redefine the orientation to place or relocate the affected device.
Increase the distance between the device and the affected device.
The power supply for the device shall be changed to another one different
from the power supply for the affected device.
For more advices, please contact the sales agent or the service
representative.
b) To reduce potential interference, do not try to alter the device without our
authorization.
c) Do not use any devices for transmitting RF signals (mobile phones, transmitters,
or wireless control products) near the device, otherwise it may result in device
performance beyond the published specifications.
2.11 CyberSecurity Instruction Safety
To comply with the provisions of Section 14.13, IEC 60601-1: 2012 and IEC/ISO 80001-1:
2010 regarding the disclosure of network specifications, network requirements and
residual risks, the relevant network security information for the device is hereby released
to assist the responsible agencies to take risk management measures for the network
connected to this device.
1) Purpose of network connection
This system has a network connection function, and data can be transmitted through the
USB port of device interfaces from USB disk to the device, which facilitates SIUI engineer
to perform program update to the device.
2) Technical specifications of network connection
【Warning】
Radio frequency (RF) energy is generated, used and radiated by the
device
, which may produce interference to other medical or
non-medical devices and wireless communication.
【Warning】
Do not use any device for generating RF signals near the device,
otherwise it may lead to malfunction in the device
unexpected results.
To Next Page
Loading...