Ski-Doo REV G4 Trail/Crossover E-TEC Series User Manual

TUNE YOUR RIDE
146
520002316-005
7. Reinstall the arm with a new screw and tighten to specifi-
cation.
8. Reinstall the spring support with a new nut and tighten to
specification.
Tightening Torque
Arm pivot screw
125 ± 10 Nm
(92 ± 7 lbf-ft)
Rear spring support nut
24.5 ± 3.5 Nm
(18 ± 3 lbf-ft)
9. Repeat the steps for the other side.
10. Adjust the rear spring settings.
11. Adjust the track tension.
Rear Shock Absorber
Rear Shock Position (rMotion and rMotion-X)
The lower pivot of the rear shock can be set to 2 different
positions on the rMotion and rMotion-X suspensions.

Ski-Doo REV G4 Trail/Crossover E-TEC Series Specifications

General

Brand	Ski-Doo
Model	REV G4 Trail/Crossover E-TEC Series
Category	Snowmobiles
Language	English