Ski-Doo REV G4 Trail/Crossover E-TEC Series User Manual

MAINTENANCE PROCEDURES
194
mmr2009-133-003_b
DEFLECTION SETTING
1. Bottom O-ring set to specification
6. Place upper O-ring to 0 kgf (0 lbf).
7. Position the tensiometer on track, halfway between front
and rear idler wheels.
8. Push the tensiometer downwards until bottom O-ring
(deflection set earlier) be aligned with the bottom of
slider shoe.
mmr2009-133-001_a

Ski-Doo REV G4 Trail/Crossover E-TEC Series Specifications

General

Brand	Ski-Doo
Model	REV G4 Trail/Crossover E-TEC Series
Category	Snowmobiles
Language	English