Ski-Doo REV G4 Trail/Crossover E-TEC Series User Manual

MAINTENANCE PROCEDURES
199
A01F0BA
1
2
3
1
1. Guides
2. Slider shoes
3. Tighten on this side
5. Tighten the rear axle nut.
WARNING
Properly tighten wheel retaining bolt, otherwise wheel may
come off and cause track to “lock”.
6. Restart engine and rotate track slowly to recheck align-
ment.
7. Tighten the rear axle nut to specified torque.
Tightening Torque
Rear idler wheel retaining
screws (3 wheels and 4
wheels models)
48 ± 6 Nm
(35 ± 4 lbf-ft)
Rear idler wheel retaining
nut and screw (2 idler
wheels models)
24.5 ± 3.5 Nm
(18 ± 3 lbf-ft)
8. Reposition snowmobile on the ground.

Ski-Doo REV G4 Trail/Crossover E-TEC Series Specifications

General

Brand	Ski-Doo
Model	REV G4 Trail/Crossover E-TEC Series
Category	Snowmobiles
Language	English