2018-05-28
Page 35 of 60
Installation DL2 Doppler Speed Log System
Non-Pay options
Docking
Auto GPS on NMEA
Temp compensation
Tilt compansation
Activating/de-activating software options.
Software options can be activated and de-activated in the DL2 menu. This page contains a table
where the installer can enter codes purchased/supplied from SKIPPER. Codes will only activate if
they detect the correct hardware in place. Codes are unique to the serial number of the system and
can not be moved from system to system. To remove an extra option, the user must re-enter the
code number.
To Next Page
Loading...