General information 7
– In the main menu press, for example Setup on the function key ⇒ page 6,
fig. 1, to call up the menu Setup Radio ⇒ page 6, fig. 2. The headline indicates
which menu you are in .
– By using the function key you can change back from each menu to the
previous menu.
Moving objects or regulators
– Place your finger on the display of a moving object on the touch-screen, for
example the “sliding regulator” in a “scrollbar” ⇒ page 6, fig. 2.
– Now move your finger over the touch-screen without interruption. The object will
follow your movements, but can only be moved within the pre-defined range.
– Lift the finger from the touch-screen at the desired position.
– To view the displayed menu section ⇒ page 6, fig. 2 move the right sliding regu-
lator in the scrollbar completely to the bottom.
– Alternatively, you can move the sliding regulator on the touch-screen to the
bottom and top by touching the function keys and .
– A sliding regulator in a set-up bar ? can alternatively be moved by pressing or
For example, on the touchscreen set-ups for the Video-DVD operation.
Voice control
– Briefly press the function key in order to activate the voice control, so-called
“Speek what you see”.
– Then give your command or follow the system guidelines.
If none of the function keys are displayed on the touch-screen when the unit is
switched on (e.g. when a DVD is playing), press briefly on the touch-screen so that the
currently available function keys are shown.
“Scrollbar”
The vertical bar on the right side of the touch-screen with a sliding regulator
between the arrow keys and is called a “scroll bar”. It indicates that further menu
entries become visible if the sliding regulator is moved completely to the bottom.
“Pop-up window”
A function key with an arrow b behind another function key shows the presently
selected set-up, e.g. with ⇒ page 6, fig. 2 .
If you press the function key on the touch-screen, a so-called “pop-up window”
will open in which all possible set-up options are displayed.
Briefly press the desired set-up option. The pop-up window will disappear and the
newly selected set-up option is displayed in the function key . To close the pop-up
window without changing the set-up, press the function button in the pop-up window
.
“Check box”
Some functions can only be switched on or off.
There is a so-called “check-box” ⇒ page 6, fig. 2 in front of a function which can
only be switched on or off. A tick in the check box = indicates that the function is
switched on, an empty check box >, indicates that it is switched off.
Briefly press the corresponding function key for switching on or off.
Input mask for free text input
Radio
To Next Page
Loading...
Need help?
General
