›
Tap or repeatedly tap the flag symbol until the
desired language keypad is displayed.
Further character variants
›
Press and hold the sign with the symbol
.
›
Select the desired symbol.
Setting up additional keyboard languages
›
Tap
Additional keypad languages
.
Voice control
Functionality
Voice control principle
Voice control works according to the principle of
dialogue between the user and the Infotainment sys-
tem.
The user says a voice command. The Infotainment
system responds or executes the voice command.
Advanced voice control
The vehicle's advanced voice control enables the ve-
hicle functions to be searched and operated online.
Advanced voice control understands fluent whole
sentences. You do not need to use set commands or
phrases.
The advanced voice control can, for example, search
for special destinations or dictate SMS messages if
the connected telephone makes this possible.
This function allows you to combine the search in
the online and oine data of the Infotainment. The
transition between online and oine search is seam-
less and imperceptible to the user.
Functional conditions
✓ Ignition is switched on.
✓ Infotainment is switched on.
Functional conditions of the advanced voice con-
trol
To use the advanced voice control, the following
conditions must also be met.
✓ The vehicle supports the function.
✓ The vehicle has Infotainment and functions that
can be controlled by the advanced voice control.
✓ The ŠKODA Connect services are active.
✓ The vehicle is within range of a contractual mo-
bile network, through which the connection to
ŠKODA Connect Services is ensured.
✓ The level of protection of personal data is set to
Share my location
.
Operation
Voice control process
›
To switch on voice control on the multifunction
steering wheel, press the button.
Or:
›
Say the “
OK Laura
” activation command.
The prerequisite for recognising the activation
command is the switched on menu item
voice control
active
.
After switching on, the icon is displayed.
›
Say a voice command.
During recognition of the voice command, the icon
is displayed.
The Infotainment system then executes the voice
command or plays the message. During the message,
the
icon is displayed.
After the execution of the voice command, voice
control is switched o.
Correcting a voice command
›
During voice command input, press the
button
on the multifunction steering wheel and say a new
voice command.
Stopping voice control
Stopping leaves more time for voice command input,
e.g. for searching for a phone contact.
›
Move your finger up or down over the Infotain-
ment screen.
Or:
›
Say the voice command “
pause
”.
Resuming stopped voice control
›
Press the button on the multifunction steering
wheel.
Or:
›
Tap on
in the Infotainment screen.
Stopping the played back message
›
Press the
button on the multifunction steering
wheel.
Ending voice control
›
Press the button on the multifunction steering
wheel twice.
Or:
›
Say the voice command “
cancel
” during voice com-
mand input.
Limitation
For some Infotainment languages, no voice control is
available. The Infotainment system will indicate this.
117
Infotainment Columbus › Voice control
To Next Page
Loading...
