▶
When driving through a sharp bend.
▶
When driving on a steep road or in ruts.
▶
When the driving lane is too narrow.
In addition to these restrictions, also observe the
ACC restrictions » page 161 .
WARNING
Risk of incorrect steering intervention!
Certain objects or markings on the roadway can be
incorrectly recognized as boundary lines.
▶
Always keep your hands on the steering wheel and
be prepared to override the steering intervention.
Settings
Activation
›
Press the button on the multifunction steering
wheel.
Regulation with the current speed and adaptive lane
guidance are started.
Activation when vehicle is stationary with auto-
matic transmission
The function is activated in one of the following
ways.
›
Put the ACC lever into position .
›
Press the button on the multifunction steering
wheel.
Or:
›
Press the button on the ACC lever
.
›
Press the button on the multifunction steering
wheel.
Regulation with the current speed and adaptive lane
guidance are started.
Deactivation
›
Depress the brake pedal.
Or:
›
Put the ACC lever into position
» page 161 .
Additional settings are identical to ACC and Lane
Assist.
Troubleshooting
Message regarding system unavailability
›
The problem solving instructions for Lane As-
sist » page 163 and ACC » page 162 are as follows.
›
If the system is still not available, seek the help of a
specialist garage.
Lane change assist system Side Assist
Usage
The system uses optical signals in the exterior mirror
to alert the driver to vehicles that could be danger-
ous when changing lanes.
Functionality
The system monitors the area next to and behind the
vehicle.
The system warns of an approaching vehicle through
the warning light in the exterior mirror cover on
the side of the vehicle where the vehicle is recog-
nized.
Driving situations in which a system warning is
given
Your vehicle will be overtaken by vehicle
A.
The fast-
er the vehicle A approaches, the earlier the warning
light comes on.
Vehicle B is overtaken by your vehicle at a speed
that is faster by max. 10 km/h. If the speed is higher
during the overtaking process, no warning will be
provided by the indicator light.
Indicator light
illuminates - there is another vehicle behind your
vehicle
flashes - there is another vehicle behind your ve-
hicle, and the turn signal on the same side is switch-
ed on
For vehicles with Lane Assist The indicator light
flashes even if your vehicle crosses the boundary line
in the direction of the approaching vehicle. The sys-
tem will trigger a steering wheel vibration in this
case.
For this, Lane Assist must be activated and the boun-
dary line between the vehicles recognized.
Operating conditions
✓ The driving speed is higher than 15 km/h.
164
Driver assist systems › Lane change assist system Side Assist
To Next Page
Loading...
