›
While driving, drive at the desired speed and con-
firm it as the speed limit.
Resetting the speed limit
›
Select and confirm the menu item
Warning at
or
(depending on display type).
›
To reset the speed limit, confirm the stored value.
If the journey is interrupted for more than 2 hours,
the set limit is deactivated, but the set value remains
stored.
Vehicle status
Display
The vehicle status is displayed in the following menu
in the infotainment system.
Menu item for vehicle status
Or:
Menu item for vehicle status
A
Vehicle areas shown in colour indicate associ-
ated warning messages
B
No notification
Warning messages regarding the vehicle con-
dition and their quantity
Functionality
In the event of a system fault, messages relating to
the relevant fault are shown on the instrument clus-
ter display when the ignition is switched on.
Malfunctions can also be displayed in infotainment.
As long as the malfunctions have not been rem-
edied, the warning messages are displayed again and
again. After the first display of the message, only the
indicator lights remain on
(Hazard) or (Warning)
is displayed.
Infotainment Bolero
Infotainment overview
Bolero Infotainment system with navigation func-
tion
A
Touchscreen
Control dial left
▶
Press: Switch Infotainment on/o
▶
Turn: Set volume
Control dial right
▶
Press: Confirm menu item
▶
Turn: select menu item/set value
Radio menu
Media menu
Phone menu
Voice control
Navigation menu
SmartLink menu
Information about vehicle settings
Overview of Infotainment menus
Bolero Infotainment without the navigation func-
tion
A
Touchscreen
Control dial left
▶
Press: Switch Infotainment on/o
66
Driver information system › Vehicle status
To Next Page
Loading...
