EasyManua.ls Logo

Skoda SUPERB IV 2020 - COMING HOME, LEAVING HOME Exterior Lighting; Dynamic Light Assist Headlight Assist System; Light Assist High-Beam Assist System

Skoda SUPERB IV 2020
232 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Malfunction of the automatic headlight circuit
Clean the windscreen in the area of the rain/light
sensor.
Beam of light in front of the vehicle has shortened
Headlights defective.
Get the help of a specialist company.
Driving lights failed
If a message regarding the failed driving lights is dis-
played, the light will work in emergency mode.
Continue driving with appropriate caution.
Get the help of a specialist company.
COMING HOME, LEAVING HOME
exterior lighting
Functionality
The COMING HOME function turns on the light after
turning o the ignition and opening the driver's door.
The light switches o automatically after the set
lighting time has elapsed.
The LEAVING HOME function switches on the light
when unlocking the vehicle with the wireless remote
control.
Functional conditions
Visibility has worsened.
The light switch is in the position.
Settings
This function is set in the following menu in the Info-
tainment system.
Or:
Light Assist high-beam assist system
Functionality
The high beam assist system automatically switches
the high beam on and o.
WARNING
Risk of accident!
If necessary, manually switch the high beam on or
o.
Functional conditions
The system is activated.
The light switch is in the position .
The driving speed is higher than 30 km/h (for
some countries, higher than 60 km/h).
The low beam is switched on.
service
turn on
Push the lever in the
direction of the arrow.
Lights up in the instru-
ment cluster from
the isolation box.
Turn o
Manually switch the high beam on or o.
Settings
Activation / deactivation
The function is activated or deactivated in the fol-
lowing menu in the Infotainment system.
Or:
Dynamic Light Assist headlight assist
system
Functionality
The headlight assist system automatically switches
the high beam on and o.
When the high beam is switched on, it adjusts the
light cone so that the drivers of oncoming and pre-
ceding vehicles are not dazzled.
WARNING
Risk of accident!
If necessary, manually switch the high beam on or
o.
Functional conditions
The system is activated.
The light switch is in the position
.
The driving speed is higher than 30 km/h (for
some countries, higher than 60 km/h).
The low beam is switched on.
51
Lighting, windscreen wipers and washers › COMING HOME, LEAVING HOME exterior lighting

Table of Contents

Related product manuals