17
Skydio X10 - Operator Manual © 2023 Skydio, Inc. All rights reserved.
Step 2 - Place batteries into the X10 Dual Charger
Ensure the battery and connection pins are free of debris and interference. Gently
push down to ensure the batteries are properly seated.
Charging
Step 3 - Insert the power supply
Two charging ports are located on the back of the Skydio X10 Dual Charger. You
may use either the 100 W USB-C power supply or the 230 W fast power supply.
Plug into a power source.
230 W fast power supply 100 W USB-C power supply
To Next Page
Loading...
