SKYJACK, Page 114
SJRT Compact Series
Engine Powered
5.10 Auto-Leveling Outrigger Control Module Pin Reference Chart
LED
GP106 Control Module
PLUG
PIN
#
WIRE #
AND
COLOUR
WIRE FUNCTION
P1 The Calibration Connection
P2 1 68A White Input indicating that the LEFT REAR outrigger is in contact with the ground
P2 2 67A Red/White Input indicating that the RIGHT REAR outrigger is in contact with the ground
P2 3 66A Blue/White Input indicating that the RIGHT FRONT outrigger is in contact with the ground
P2 4
65A Green/White
Input indicating that the LEFT FRONT outrigger is in contact with the ground
P2 5 70 Green/Black Input for AUTO-LEVEL function to extend the outriggers to level the machine
P2 6 79 Green Input for AUTO-RETRACT function to retract the outriggers until the switch is released
P2 7 70A Red/White Outrigger Light on Outrigger Control Box
P2 8 65 Green/Black STABLE output to indicate that all outriggers are in contact with the ground
P2 9 28 Green TILT output to indicate that the machine is level (ANSI/CSA only)
P2 10 44 Green Tilt override / High Drive Cutout
P2 11 02 White Negative Input
P2 12 10A Black Main Power Input
P4 1 78 Black/White Output used to extend the LEFT REAR outrigger
P4 2 77 Blue/Black Output used to extend the RIGHT REAR outrigger
P4 3 76 Red/Black Output used to extend the RIGHT FRONT outrigger
P4 4
75 Orange/Black
Output used to extend the LEFT FRONT outrigger
P4 5 74 Black Output used to retract the LEFT REAR outrigger
P4 6 73 Blue Output used to retract the RIGHT REAR outrigger
P4 7 72 Red Output used to retract the RIGHT FRONT outrigger
P4 8 71 Orange Output used to retract the LEFT FRONT outrigger
P4 9
35C White/Black
Power input for outriggers
60401AC
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
