SkyWave IDP-680 - Fuse; Input;Output

IDP 600 Terminal Series - Hardware Guide
T200, Version 02 12 © SkyWave Proprietary
3.2.4 Fuse
The IDP 600 series terminals have an internal fuse. The internal fuse provides protection
in the event of an internal short on the terminal. The internal fuse cannot be reset and is
not field repairable.
3.3 Input/Output
The terminal's four configurable I/O lines are each independently operable in one of
following modes:
 Digital Input
 Digital Output
 Analog Input
 Disabled
When disabled the I/O is physically configured as an analog input.