IDP 600 Terminal Series - Hardware Guide
T200, Version 02 20 © SkyWave Proprietary
Figure 19 IDP-690 Side View Enclosure Dimensions (mm)
IDP-680
IDP-690
3.8 LED
The terminal has an integral LED to indicate that the terminal has successfully powered
up (Section 4.8).
The visual indicator (LED) does not indicate satellite status. Its only purpose is to
confirm terminal start-up.
3.9 Non-Volatile Storage
The IDP 600 series has non-volatile flash memory that is shared by the terminal firmware
and user services.
Non-volatile On-board Flash Storage
Write-Erase Cycles (per operating life)
For additional details, see http://www.ides.com/PWeb/obds.aspx?E=15025