Warranty Policy
Slaughter Company, certifies that the tester listed in this manual meets or exceeds published manufacturing
specifications. This tester was calibrated using standards that are traceable to the National Institute of
Standards and Technology (NIST).
Your new tester is warranted to be free from defects in workmanship and material for a period of (1) year
from date of shipment.
Slaughter Company recommends that your tester be calibrated on a twelve-month cycle. A return material
authorization (RMA) must be obtained from Slaughter Company. Please contact our Customer Support Center
at 1-847-932-3662 to obtain an RMA number. Damages sustained as a result of improper packaging will not be
honored. Transportation costs for the return of the tester for warranty service must be prepaid by the
customer. Slaughter Company will assume the return freight costs when returning the tester to the customer.
The return method will be at the discretion of Slaughter Company.
Except as provided herein, Slaughter Company makes no warranties to the purchaser of this tester and all
other warranties, express or implied (including, without limitation, merchantability or fitness for a particular
purpose) are hereby excluded, disclaimed and waived.
Any non-authorized modifications, tampering or physical damage will void your warranty. Elimination of any
connections in the earth grounding system or bypassing any safety systems will void this warranty. This
warranty does not cover accessories not of Slaughter Company manufacture. Parts used must be parts that
are recommended by Slaughter Company as an acceptable specified part. Use of non-authorized parts in the
repair of this tester will void the warranty.
To Next Page
Loading...
