1
SAFETY PRECAUTIONS REQUIRED FOR HIGH VOLTAGE TESTING!
GENERAL:
This product and its related documentation must be reviewed for familiarization with safety markings and
instructions before operation. This product is a Safety Class I tester (provided with a protective earth
terminal).
Before applying power verify that the tester is set to the correct line voltage (115 or 230) and the correct fuse
is installed.
INSTRUCTION MANUAL SYMBOL. PLEASE REFER TO THE INSTRUCTION MANUAL FOR SPECIFIC
WARNING OR CAUTION INFORMATION TO AVOID PERSONAL INJURY OR DAMAGE TO THE
PRODUCT.
INDICATES HAZARDOUS VOLTAGES MAY BE PRESENT.
CHASSIS GROUND SYMBOL.
CALLS ATTENTION TO A PROCEDURE, PRACTICE, OR CONDITION, THAT COULD
POSSIBLY CAUSE BODILY INJURY OR DEATH.
CALLS ATTENTION TO A PROCEDURE, PRACTICE, OR CONDITION, THAT COULD
CAUSE DAMAGE TO EQUIPMENT OR PERMANENT LOSS OF DATA.
A HIPOT PRODUCES VOLTAGES AND CURRENTS WHICH CAN CAUSE HARMFUL OR
FATAL ELECTRIC SHOCK. TO PREVENT ACCIDENTAL INJURY OR DEATH, THESE SAFETY
PROCEDURES MUST BE STRICTLY OBSERVED WHEN HANDLING AND USING THE TEST
TESTER.
To Next Page
Loading...
