Need help?Do you have a question about the SMA SUNNY HOME MANAGER 2.0 and is the answer not in the manual?
General| Model | SUNNY HOME MANAGER 2.0 |
|---|---|
| Category | Measuring Instruments |
| Communication Interfaces | Ethernet, WLAN |
| Operating Temperature | -25 °C to +60 °C |
| Storage Temperature | -40 °C to +85 °C |
| Humidity | 5% to 95%, non-condensing |
| Protection Class | IP20 |
| Mounting Location | Indoor |
| Supported Protocols | Modbus TCP |
| Power Supply | 100-240 V AC |
Crucial safety guidelines that must be followed during operation.
Provides recommendations for securing the system against cyber threats.
Lists the essential requirements for installing the device.
Highlights safety precautions for electrical connections.
Details the process of connecting the voltage supply to the device.
Lists the prerequisites for connecting the voltage supply.
Instructions for connecting voltage supply up to 63 A.
Instructions for connecting voltage supply exceeding 63 A.
Guides on setting up communication with Sunny Portal.
Step-by-step guide to creating a new system in Sunny Portal.
Overview of the user interface and its components.
Instructions on how to access the system's user interface.
Detailed explanation of the main elements of the user interface.
Section for configuring various system parameters.
Explains how to configure active power feed-in limitations.
Displays an overview of all configured devices in the system.
Details on viewing and changing device properties.
Shows a list of newly detected devices in the system.
Provides instructions for adding new or replacing existing devices.
Guides on configuring the Sunny Home Manager settings.
Explains how to choose between simple and extended configuration modes.
Steps for adding and configuring inverters to the system.
Detailed instructions for adding a new inverter.
Provides instructions for replacing the Sunny Home Manager unit.
Guides on performing a factory reset on the Sunny Home Manager.
Steps to reassign the device after a reset.
Instructions on how to restart the Sunny Home Manager.
Provides an overview and planning interface for configured loads.
Details the configuration process for switching devices.
Highlights safety precautions for configuring switching devices.
Guides on setting the specific characteristics of a load.
Provides an overview of all available system data.
Displays current system status and forecasts energy generation.
Details the current status visualization of power flow.
Shows expected PV power and load recommendations.
Visualizes energy generation, consumption, and battery usage.
Provides an overview of load operation and energy mix.
Details the overview of load operation and energy mix.
Provides an overview of system monitoring functions.
Monitors the communication status with Sunny Portal.
Compares inverter yields to detect potential losses.
Guides on configuring PV system monitoring settings.
Details how to set communication monitoring parameters.
Explains how to configure inverter comparison settings.
Describes the PV system profile and its displayed information.
Defines user groups and their associated rights within Sunny Portal.
Outlines the criteria for creating strong system passwords.
Specifies the types of passwords required for system access.
Provides instructions for changing Sunny Portal and system passwords.
Guides on password recovery procedures.
Lists common error messages and their corrective measures.
Addresses issues encountered during system setup registration.
Troubleshoots issues related to device detection and integration.
Addresses issues with firmware and device updates.
Troubleshoots configuration and control issues with radio-controlled sockets.
Guides on using the assistant for network connectivity issues.
Explains how to interpret and address messages in the system logbook.
Provides steps for setting up forecast-based battery charging.
Technical specifications related to the Energy Manager.
Details accuracy and technical specifications of the measuring device.
To Next Page
