SMA SUNNY HOME MANAGER 2.0 - Page 74

12 Load Control
SMA Solar Technology AG
Operating manualHM-20-BE-en-1974
D
F
C
G
B
A
E
I
H
L
M
K
Figure 13: Load overview and planning (example)
Position Designation Explanation
A Filter options
Using the filter options, you can filter the list of loads. Selecting the option Active
loads will hide the loads that are currently not assigned to a switching device and
therefore not controlled by the SunnyHomeManager.
B Load list List of loads which have been configured for use with the SunnyHomeManager.
C Load icon Symbol of the load
D Name of load Name of the load with assigned color
A new color can be selected from the color palette.
E Type of load Type of the load
F Status Status of the load
= OK
The load is fully configured and can receive data.
= Not active
Load is not assigned to a switching device.
= Load is not fully configured
G Configuration
Opens the tab Name of Load, on which you can configure the load properties.