SMA Technologie AG The Sunny Island 5048
Technical Description SI5048-11:EE4206 Page 19
2.6 Accessories (Optional)
The following accessories for the Sunny Island 5048 are also available:
• GenMan (generator manager) (SMA order number: "SI-GenMan-...")
Enables the Sunny Island 5048 to control generators which require more than a
simple start/stop signal for remote control (see section 14.1.1 "Generator Start
Options" (Page 95)).
• Separate fuse for the battery (SMA order number: "SI-BATFUSE-..."
Enables cable protection (used with strip fuse ...-SIBA-...) or disconnection with
cable protection (used with NH fuse ...-NH01-...) of the Sunny Island 5048 from
the connected battery (see section 6.2.2 "Cable Protection" (Page 36)).
• Separate 48 V DC contactor (SMA order number: "SI-LS-..." (with 25/40/65/95
A))
Enables load shedding on the AC or DC side (see section 6.4.4 "Multi-function
Relay 1 and 2" (Page 47)).
• Separate current shunt for battery current measurement (SMA order number: "SI-
SHUNT400-60")
Enables battery current measurement on the AC or DC side (see section 6.4.2
"Battery Current Sensor" (Page 42)).
SMA Technologie AG also offers an extensive range of products allowing you to
communicate with the Sunny Island 5048, to query data, and much more. Among these
devices are:
• Sunny Boy Control
• Sunny Boy Control Plus
•Sunny WebBox
The "Sunny Data Control" software, with which you can configure your inverter as well
as read out and analyze data, can be downloaded for free from the SMA Technologie
AG website at www.SMA.de (see section 22 "Contact" (Page 159)).
Wall anchors for the wall bracket (e.g. SX 10)
Material (not included in delivery)
To Next Page
Loading...
