Archiving Data on an MMC/SD Card SMA Technologie AG
Page 78 SI5048-11:EE4206 Technical Description
11.1 Analysis using a PC
If you have inserted the MMC/SD card in your card reader on your PC, you can (when
using WINDOWS) search for the corresponding drive in Explorer. The following data
is on this drive (here: G:):
The data saved on the MMC/SD card can be processed using common table
calculation programs.
The first 14 lines of the file are used for information (file header) and then two column
heading lines follow. The following data is separated by a semicolon and decimals
points are displayed by a dot. The date format is dd.mm.yyyy. The time format is
hh:mm.
The "BOOTEX.LOG" file is not necessarily on the card. It is created depending on
the operating system used (e.g. WindowsXP or Windows2000).
For additional information on processing the log data, please refer to the manual
of the data processing software you use.
To Next Page
Loading...
