Opening and Closing SMA Technologie AG
Page 32 SI5048-11:EE4206 Technical Description
5.2 Closing the Device
Before installing the housing cover of the Sunny Island 5048,
ensure that all cables are properly laid and that all tools have
been removed from within the housing (see section 6 "Electrical
Connection" (Page 33)).
1. Starting from the front, place the cover evenly on the
housing.
2. Attach the housing cover onto the Sunny Island 5048 using
the six Allen screws. Tighten the screws evenly and firmly.
When closing the Sunny Island 5048, make sure that the tooth lock washers are
under the six Allen screws. They secure the ground connection of the cover.
To Next Page
Loading...
