SMA Technologie AG Control Elements
Technical Description SI5048-11:EE4206 Page 55
7 Control Elements
In order to commission the Sunny Island 5048, you should familiarize yourself with its
operation beforehand. The individual control elements can be seen in the following
figure.
7.1 Display Messages
The display of the Sunny Island 5048 has two lines each with 16 characters. For details,
please see section 10.6 "Display Messages (Overview)" (Page 73).
7.2 DC Circuit Breaker
The DC circuit breaker is used to switch on/off as well as disconnect the Sunny Island
5048 on the DC side. For details, see section 9 "Activation and Deactivation" (Page
61).
Display
DC circuit breaker
Keys
MMC/SD card
LEDs
[]¿¿¿¿¿¿¿¿¿¿¿
À Á Â M1 * oo!
Output power/charging power
Direction of energy
flow and system status
Status of ext. sources
Device assignment
Relay2 status
Warning display
Load status
Relay1 status
To Next Page
Loading...
