SMA Sunny Island 5048 - Writing Log Data; Status Messages

Archiving Data on an MMC/SD Card SMA Technologie AG
Page 80 SI5048-11:EE4206 Technical Description
11.5 Writing Log Data
Using the "#440.02 DatLogEna" parameter, you can activate the function for writing
log data to your MMC/SD card (activated by default).
11.6 Status Messages
Using the "#331.07 CardStt" parameter, you can request the status of your MMC/SD
card:
The write protect function of SD cards (plastic sliding clip on the left side) is not
supported by the Sunny Island 5048. Please note this when writing data to your
card.
If the Sunny Island 5048 is writing data to the MMC/SD
card, removing the card is prohibited and the following
message appears on the display:
Display Meaning
Your MMC/SD card is deactivated.
Your MMC/SD card is activated.
The memory capacity of your MMC/SD card has been
exceeded.
Your MMC/SD card has an invalid file format.
Your MMC/SD card is incompatible.
Your Sunny Island 5048 is loading parameters from the
MMC/SD card.
Loading parameters from your MMC/SD card failed.
Do not remove
MMC/SD card ...
Off
Operational
Out of Space
Bad File Sys
I
ncomp
Parameter
ParameterFailed